admin
Admin
Admin
| Posts: 317 |  |
Karma: 0
|
Re:Selection Mode not Supported.. - 2006/08/03 11:52
Found the problem, it is a bug in the initialization of a fresh installation. Will fix this soon.
Solution:
- Start program
- select the "other" tab at the bottom
- select the "object tab" (on the other tab)
- the line "operate on object" -> most rights pulldown menu is now CN, select an other attribute and reselect the CN again.
- select the option Home (if not already done)
- select the option Use Volume/Path .....
- select the option ADD CN (the bold line)
- select the red floppy button at the top and save the current setting as default.set
Hans Boone |
